Pre-Owned Options

These Steelcase Montage cubicles measure 6’ x 8’, the panels are 45" tall  and powered on the spine.  Each workstation consists of:

• 30" x 72" worksurface
• 24" x 66"  worksurface
• 30" two drawer lateral file
• B/B/F pedestal

These workstations were originally configured in bullpens and must be sold that way.  The paint is Steelcase finish code 7238, Fieldstone Textured.  The laminate is 2422/6036.  The trim is a combination of Fieldstone Textured and Black.  A close up of the finishes are shown in the second photograph.

These Herman Miller workstations measure 8’ x 6’, the panels are 47" tall, there is glass on the aisle panels and spine panels.  The divider panels are 57" tall.  The panels are powered down the spine with 8 wire power.  Each workstation consists of:

• 96" x 24" worksurface
• 24" x 24" worksurface
• 48" x 30" x 24" worksurface-(43) rights (42) lefts
• B/B/F pedestal
• 48" binder bin with sliding door
• shelf (37) 36", (48) 24"
• Storage tower 55" T x 30" W

These cubicles were originally configured in (4) runs of three, (5) runs of two, (1) pod of two, (10) pods of six, and a single.

These Herman Miller workstations measure 6’ x 6’, the panels are 47" tall, some of the panels have an additional 12" piece of glass.  The panels are powered down the spine.  Each workstation consists of:

• 24" x 48" worksurface, wood

• 24" x 72"  worksurface, wood
• F/F Mobile pedestal
• B/B/F Mobile pedestal

The panels at the ends of all the pods/runs feature wood tiles on the outside (corridors). The paint finish is Metallic Champagne, the work surfaces are medium cherry veneer.  Please note that the stations were configured in shared open bull pens, there are no two-way connectors but they can be purchased separately.  The cubes were originally configured in (4) pods of ten with glass, (2) pods of twelve with glass, (1) pod of two with glass, (1) pod of four with glass, (2) runs of six with no glass, and (4) runs of two with no glass.  The finish on these surfaces is a shade darker than the cubicles posted under W6162.

These Haworth Compose workstations measure 8' x 8', the panels are 67" tall and wing down to 49" tall.  Each cubicle is comprised of:

• (2) 24"d x 48"w x 66"w x 24"d extended corner worksurfaces
• (2) 24"d x 30"w worksurfaces
• B/B/F pedestal
• F/F pedestal
• 30" two drawer lateral file
• (2) open shelves

These cubes are powered on the main spine.  They were originally configured in (3) pods of seven, (2) pods of six, (1) pod of nine, (1) pod of two, (2) runs of two and (1) run of five.  The paint is Haworth TR-G which is Grey Tone.

These Steelcase Montage cubicles measure 8’ x 7’, the panels are 65" tall  and powered on the spine and first panel off with 8 wire 3+1 power.  Each workstation consists of:

• 76" x 29" electric sit stand desk
• 96" x 24" worksurface
• 36" x 24"d single drawer lateral file
• 30" x 24"d single drawer lateral file
• 30" x 18"d shelf
• 60" shelf

The paint in these cubes is Steelcase 4799, Platinum Metallic.